When we left our yarn last post, it was getting a nice cherry red overdye on the portion previously painted with  small black sections. Here are a pair of skeins after all the dyeing has been done.

But who wants to deal with a skein of yarn that’s over six yards long? No one, clearly, so it’s off to be reskeined to a more workable skein diameter.

The skein is looped around a chair, then through a C-clamp attached to the counter. The end of the skein is going to the electric skeiner on the left, where’s it’s being wound into a standard 2-yard diameter skein size. When I’m not taking a picture of the process, I’m up near the skeiner pulling the yarn forward and untangling it as necessary. There’s too much friction in the system to be able to sit back and watch the yarn wind off, I have to actively move it along.  It’s a good upper body exercise, rather like hauling up an anchor!

 

Finished skeins look like this. The small green skeinlette is a matching one for knitting heels and toes that are a solid color, rather than getting clumpy striping due to the change in diameter of the knitting in those areas. This has turned into a pretty popular option, with more than half of the customers choosing to get the solid skeinlettes.

We’ll finish off with a shot of a sample length of the yarn, wound into a small ball.  The final step is knitting this onto my Tube of Eternal Sampling so see how the self-striping pattern actually works. And that’ll be the next post!

Advertisements

I’ve been dyeing some yarn in a watermelon-inspired colorway, and thought I’d take the opportunity to share someof the dyeing process with you. First, let’s look at some watermelon.  I want a self-striping yarn, so naturally it’s  going  to be green, white, and pink stripes. But I also want the seeds, and I want them to be black.

Here are some test samples.  They’ve all been steamed, so the colors are set.  The green gradation is nice, so I’ll use that green formula. For the watermelon seeds, there are two techniques  in process here.  The red and black skeinlette was painted black, then red was added.  The white and black skeinlette will get an overdye in a red dyebath to see which technique gives me the effect I’m hoping for.

 Now we’re looking at the  same red/black skeinlette from above on the left, and the newly overdyed red/black skein on the right.  On left skeinlette, some of  the black dye mixed with the red, shifting the color.  The overdyed skein to the right keeps the red true to itself, so that’s the way to go.

Now to dye a full skein.  Actually, I dye the self-striping yarns two at a time, so here are two skeins laid out in the floor. I’ve wound them off on a warping board, soaked them in water, and laid them out to mark off the lengths that get dyed each color. I use twist ties to indicate where to do the color changes.

This colorway will have three shades of green.  Here’s the darkest green, which is the end of the skein. The skein is on plastic wrap, which gets wrapped around the yarn as I go, to keep the colors from rubbing off on other sections of yarn.

I’ve painted all the green sections, moved past the section that will stay white in the middle, and now am working on painting the black seeds.  The first pair of skeins had way too much black — it spread a lot more than I anticipated — so I’m just painting on very short sections.

Now all the painted parts are done, and it’s ready to steam.

Don’t confuse the yarn steamer with the char sui bao steamer!

After the painted sections are steam set, the end of the skein that will be red and black gets its red overdye.

You can see the black sections — since the black has been already been steam set, it won’t spread out or effect the red dye at all.

Stay tuned for the rest of the process!

Again with the snow? I was not expecting this.  Neither were the flowers.  But they are hardy, and the snow will pass.

As my term of office on the Board of  the Friends of the University of Washington Libraries came to an end, I wanted to make some bookmarks as a “Good-by and thank you” gift for the people I worked with.  Inkle weaving makes a  sturdy and pretty bookmark, and you don’t even have to have an inkle loom to do it.  My Baby Wolf holds an inkle warp just fine, going through the heddles but leaving out the reed.

As a bonus, the beater, locked into place with no reed in it, makes a great shelf to hold the shuttle, scissors, and other odds and ends I used.

The color scheme was based on the UW colors of purple and gold. The shuttle seen above, with fat gold yarn on it, was just being used as a spacer between bookmarks.

Here’s the weaving off the loom.  Next step was a bath in warm soapy water, followed by a rinse and air drying. Then, I cut the long strip into separate bookmarks.  A great way to get even cuts across a woven band is by using a rotary cutter.

I ended up with 25 bookmarks, just enough.

A nice little commemorative gift!

Pretty much everything I have to say in terms of me making cookies  this time of year was said last year, so go check out that post, which has recipes and pictures.  I like to crank up the Christmas CDs while cranking out the Brune Kager, and lead-off tune is alway Feliz Navidad  by the sublime Jose Feliciano.  Enjoy!

http://www.youtube.com/watch?v=wGuCvFdrWPg&feature=related